Microtubes, Vials, Test tubes and Disposable centrifuge tubes can be used. Versatile Centrifugal concentrator corresponding to also cooling water circulation.
- Concentrating and Drying of Nucleic acids, Proteins and Sugar chains
●Concentrating samples before and after analysis such as HPLC
●Concentrating in Peptide Synthesis
Improved Reproducibility by digitization
Adopted to Magnet drive, Teflon? coated Chamber and PVC-made Lid (Chemically resistant to glass). Plus, the number of revolutions and temp. were digitized and the conditions of vague concentration drying quantified.
Enables Automatic/Manual Vacuum release, Nitrogen purge easily, Cold water circulation
Vacuum release with Automatic and Manual. For samples with resistant to oxidation, also Nitrogen gas cylinder can be connected from Leak filter on the back. Plus, enables to keep the chamber cool by connecting a circulation device (setup required). It suppresses heat generation from Rotors and can safely concentrate heat-sensitive samples.
Memorizes Temp., Rotational speed and Time. Invokes those and enables to start the operation just pressing the start button. Also enables to turn off Heater or cancel Timer manually on the way.
”Freez Dryer” mode
Enables Frozen samples (beforehand) be Lyophilized. It is required to stop the rotation of Heater and Rotors and keep moving Vacuum pump. Such operation can be done automatically with “Freez Dryer” mode. Although necessary to consider beforehand where Heater and Rotor rotation should be stopped, “Freez Dryer” very useful for Heat-sensitive samples and Samples with chemical resistance inadequate to Freeze Dryers. Besides, Oil-sealed rotary vacuum pump required for Lyophilization.
|Temperature range||4℃ to 70℃ (Settable temp. range 0℃ to 70℃) (*1)|
|Rotational speed||300 to 2000r/min (*2)|
|Vacuum release||Timer automatic release (also Manual)|
|Rotor rotation system||Magnet drive|
|Timer||1min to 99h59min (Digitally)|
|Lid/Chamber material||Lid: PVC, Chamber: Stainless steel SUS304 (Teflon coated)|
|Vacuum gauge||0 to -0.1MPa (Bourdon tube)|
|Suction nozzle outer dia.||Rc 1/2 (φ13.8mm)|
|Other function||1 x Pump switch interlocking outlet (to 7A)|
|(Pump is started after reaching 85% of the preset rotational speed. )|
|Safe devices/protections||Overcurrent protection, Heater/Rotation/Pump stopped when Lid open, High temp., Various indication (Non-volatile memory, Temp. sensor, Heater output, High/Low temp., Motor, Rotational speed limit).|
|Dimensions/Weight||310 (W) x 380 (D) x 343 (H)mm|
|Power supply (*3)||AC100V/2.7A|
|(*1) Cooling water circulation unit required separately for use below room temp.|
|(*2) Max. 440 x g (Reference value in Outer perimeter of 96R Rotar).|
|(*3 ) The current will increase according to the use of Pump interlocking outlet.|
|●Diaphragm-type Vacuum pump (DTU-20/DTC-60 etc.) or Dry scroll type with chemical resistant (VU-100HC etc.) recommended to use. Besides, Oil-sealed rotary vacuum pump required for Lyophilization.|