Description

When “eco setting” is enable, if the door is not opened or closed and no operations are performed for 10 minutes, the cooling device is automatically stopped.
Max. 25% stand-by electricity is reduced, comparing the stand-by electricity without eco setting. (under in-house evaluation) When a user forgets to turn off the main power switch for a long time (such as overnight), stand -by electricity consumption isreduced.
Set “eco” function and contribute energy saving.

Specifications
Model CT18R
Max. Speed (rpm) 18,000 (T18A41 rotor)
Max.RCF (xg) 31,100 (T18A41 rotor)
Maximum Capacity 1,000mL (250ml x 4 : T5SS31 rotor)
Speed Setting Range (rpm) 300 – 18,000
Timer 1 to 99 min. (in increments of 1 min.) with HOLD function or
1 to 59 sec. with HOLD function
Temperature Setting Range (ºC) -20 to +40
Acceleration/Deceleration Mode Accel: 10 modes, Decel: 10 modes and brake-free
Memory-based programmed operation 99 programs, including 3 direct select buttons
Drive Unit Induction motor (Inverter)
Refrigerator 300W Hermetic compressor (Refrigerant: HFC 134a)
Rotor stop signal Select from 5 melodies, beep and mute
Interface connection LAN X 1 (Option)
Safety functions Door interlock, dual overspeed detector, Rotor ID detector,
imbalance detector, over-temperature detector
Noise level Less than 55dB by fixed angle rotor
Less than 59dB by swinging bucket rotor
Compliance with standard CE, cCSAus *
Heat radiation 650W
Power Requirement (115V -127V model) ±10% 60Hz 15A (ordering number: 915617C3)
(200 – 240V model) ±10% 50Hz 8A (ordering number: 915617C1 and 915617C2 **)
Dimentions (mm) 634 mm (W) X 550 mm (D) X 340 mm (H)
(Height to the table: 291 mm)
Weight (kg) 80
Installation Environment Ambient temperature for operation:2℃ to 40 ℃
Ambient temberature for assuring performance: 15℃ to 25℃