Dry Sterilizer (Laboratory use) (SI402)
Dry Sterilizer (Laboratory use) (SI402)
Product Summary
Natural convection hot air sterilizer with program function, easy to set
Features of Dry Sterilizer (Laboratory use) (SI402)
Features
Quick, safe and reliable sterilization function.
Features
Easy operation, available for fixed temp., program, quick auto stop,
auto stop and program auto start functions.
Features
Use special function menu keys and up/down keys to realize digital
setting. with repeat function, 6 patterns program operation.
Features
Use submenu keys to operate calibration offset, power failure compensation and key locking.
Safety
Self-diagnosis circuit (abnormal temp. sensing, heater
disconnection, auto overheat prevention, SSR short circuit),
overheat protector, ELB to prevent overcurrent, key lock, etc.
Specifications
Specifications
| Item Code | 292248 |
|---|---|
| Model | SI402 |
| Circulation method | Natural convection (for laboratory use only) |
| Operating temp. range | Room temp. +5~260°C |
| Temp. adjustment accuracy | JTM K05 ±1°C (at 260°C) |
| Temp. distribution accuracy | JTM K05 ±6°C (at 260°C) |
| Max. temp. reaching time | Approx. 70min. |
| Interior / Exterior | Stainless steel plate / chrome-free electrogalvanized steel sheet with chemical proofing coating |
| Heater | Wire type, 1.2kW |
| Air exhaust port | I.D. 30mm×2 (top) |
| Temp. control | PID control / VS6 type |
| Temp. setting | Use special function menu key and up/down key to set |
| Temp. display | Measured temp. display: Green 4-digit LED digital display,Setting temp. display: Red 4-digit LED digital display |
| Timer | 0 min-99 hr 59 min and 100 hr-999 hr 50 min (Attached with timing wait function) |
| Operation function | Fixed temp. operation, Auto start, Quick auto stop, Program auto-start operation |
| Program mode | Program operation 6 patterns (30 steps×1, 15 steps×2, 10 steps×3) |
| Additional function | Calibration offset, Key lock, Power outage compensation |
| Sensor | K thermocouple (Temp. controller and overheat protector) |
| Safety device | Self-diagnosis circuit (Abnormal temp. sensing, Heater disconnection, Auto overheat prevention, SSR short circuit) |
| Shelf plate with standard load | Approx. 15 kg/pc. |
| Shelf support step number / pitch | 10 steps / 30mm |
| Shelf plate material | Stainless punching metal |
| Shelf plate / bracket | 2pcs./4pcs. |
| Optional | Stand/ONS60 ,Stacking support/ODK82, Shelf plate (1 plate with 2 brackets) etc. |
| Internal dimensions（W×D×H mm） | 450×430×400mm |
| External dimensions（W×D×H mm） | 550×540×777mm |
| Remarks(dimensions) | Internal capacity 77L |
| Power Source | AC115/AC220V 50/60Hz, Single phase |
| Weight | 42kg |