LED Indicator of 47cm length is mounted in a front of the table. The LED indicator shows the operating status by different colors, luminous patterns and levels of brightness. You can select a color of LED Indicator from 7 colors and light-off, level of brightness (3 levels) and luminous pattern (lighting, slow blinking, fast blinking, fading : 4 patterns) for each status (stop, acceleration, running at set speed, deceleration, vacuum holding, in economy mode, acceleration in Zonal mode, deceleration in Zonal mode, Alert status). So operating status is at a glance with the LED Indicator now.
The control panel, 6.5-inch size touch-sensitive color LCD panel, is located in a front part of the machine. You do not need to stretch your arm to operate the centrifuge.
The intelligible screen designs, such as a wide indication of basic parameters, many icons for selecting function, folder colors with each symbol for program management, offers user-friendly operation, like operating a smart phone, to all users.
The table height of the CP-NX is 836mm. The low table height enables users to load / unload the rotor easier. The rotor is automatically locked by the centrifugal force once the rotation is started by the “self-locking rotor system”. So it is not necessary to fix the rotor by screwing the rotor onto the drive shaft or push the button to lock/unlock the rotor any more. In addition, the improved door structure design based on the latest structure analysis technology made the door thickness 5 mm thinner than the one of our former model. The lighter door offers the same safety as the before and makes door-sliding movement (back and forth) smoother than before.
Total run times and total accumulated operating hours are managed automatically by the system. The RLM sensor of the ultracentrifuge reads the latest information of total nun times and total accumulated operating hours from the RLM adapter during the acceleration and the latest information of total run times and total accumulated operating hours are recorded in the RLM memory assembled on the rotor during the deceleration.
Do you still adjust balance between sample tubes using scale or balance before the centrifugation? himac ultracentrifuge model CP-NX series offers visual balancing with max. 5mm sample surface difference between the sample tubes*1. (*1: except P21A2 rotor)
The visual balancing was realized by the non-contact imbalance sensor which monitors oscillation of the drive shaft during the rotation. Imbalance alarm criteria were optimized based on the characteristics of each rotor, so that system offers bigger imbalance tolerance. Of course, the sensor activates the imbalance alarm and stops rotation immediately in case the abnormal oscillation is detected.
|Max. Speed (rpm)||100||90||80|
|Speed Control Accuracy||±2 rpm (1,000 rpm to max. speed)|
|ACCEL/DECEL Mode||ACCEL : 10 / DECEL : 11 (10 and coasting)|
|Set Speed Range||1,000 rpm to max. speed in increments of 100 rpm|
|Timer||from 1 min to 999 hours 59 min (with 1 min increments) with HOLD function|
|Set Temperature Range||from 0ºC to 40ºC with 1ºC increments (Accuracy : +/- 0.5ºC)|
|Vacuum System||Oil rotary vacuum pump and oil diffusion pump|
|Operating Sound||51dB(A) (running at set speed, under in-house test condition)|
|Heat Radiation Into a Room||1kW or below|
|Cooling System||Thermo-module cooling system (CFC/HCFC/HFC-free)|
|Control Panel||Touch-sensitive color LCD panel (6.5 inch)|
|Data Communication||USB : Host x 1, Devise x 1 / LAN x 1|
|Rotor Life Management||Automatic Rotor Life Management for rotors with RLM adapter|
|Registered by serial number to the system for rotors with optical overspeed disk|
|Size (mm)||790 (W) x 690(D) x 880(H) (with door cover : 890(D))|
|Max. height to the end of the door handle : 925(H) / Height to the table : 863(H)|
|Floor area (m2)||0.81 (900 x 900 mm)|
|Power||Single phase, AC200V, 208V and 220V +/-10%, Max. 20A (normally 8A)|
|Single phase, AC230V and 240V +/-10%, Max. 16A (normally 7A)|
|Installation Environment||Ambient temperature for operation : 2ºC to 40ºC|
|Ambient temperature for performance guarantee : 10ºC to 30ºC|
|Standard||CE marking qualified|
|Product Safety : EN61010-1 and EN 61010-2-020 Electromagnetic Compatibility : EN 61326-1|
|Warranty of Drive Unit||10 years after the shipment (Full warranty) *1|
|Part No. (Asia/Middle East)||901067C1||901068C1||901069C1|
|Part No. (EU market)||901067C2||901068C2||901069C2|
|Part No. (USA/Canada)||901067C3||901068C3||901069C3|