| Specifications |
|
|
|
| Model |
SP-12N |
| Temperature Range |
RT+5ºC – +100 ºC (*) |
| Temp. Control Accuracy |
from ±0.1ºC |
| Minimum temperature setting unit |
0.1ºC (setting and display) |
| Outside circulation function |
Max. flow : 6.2L/min |
| Temperature setting |
By UP/ DOWN key |
| Flow |
Jet blast (volume adjust) |
| Temperature Display |
Digital display (switching between setting temperature and inside chamber temperature) |
| Timer |
Buzzer timer : 1min – 99h59min |
| OFF timer : 1min – 99h59min |
| Heater |
1.2kW (time proportioning variable output : 0-100%) |
| Weight |
Approx. 5kg |
| Water level range |
Minimum water level: 55mm (from the bottom of PolyC water bath) |
| Safety device / function |
Circuit protector (15A), fuse (2A), float type prohibition of boiling while empty, protective cover for heater |
| |
| Misalignment high and low temperature error, lowing water, sensor error, auto tuning error, non-volatile storage error |
| ※Notified by buzzer |
| Occupying dimensions inside bath |
130 x 85 x 145Hmm |
| Dimensions |
130 x 164 x 315Hmm |
| Power Supply |
AC100V 13A |
| Standard Accessory |
PolyC water bath x 1 (can be use at up to +70 ºC), micro tube floater x 1 |
| (*)Temperature setting range is -20ºC – +100 ºC for SP-12N. Combining with optional low temperature water bath unit or immersion cooler enables control below room temperature. When using at over +70 ºC, using optional silicon oil, stainless thermal insulation water bath and cover for stainless thermal insulation water bath are required. |
